Skip to Main Content
U.S. Forest Service
Caring for the land and serving people

United States Department of Agriculture

Home > Search > Publication Information

  1. Share via EmailShare on FacebookShare on LinkedInShare on Twitter
    Dislike this pubLike this pub
    Author(s): Kristen PelzC. C. RhoadesR. M. HubbardM. A. Battaglia; F. W. Smith
    Date: 2015
    Source: Forest Ecology and Management. 336: 11-20.
    Publication Series: Scientific Journal (JRNL)
    Station: Rocky Mountain Research Station
    PDF: Download Publication  (504.0 KB)


    Mountain pine beetle outbreaks have killed lodgepole pine on more than one million hectares of Colorado and southern Wyoming forest during the last decade and have prompted harvest operations throughout the region. In northern Colorado, lodgepole pine commonly occurs in mixed stands with subalpine fir, Engelmann spruce, and aspen. Variation in tree species composition will influence structure, fuel profiles and fire hazard as forests recover from bark beetle outbreaks, and this diversity has implications for design and implementation of fuel reduction treatments. We used stand inventory data to predict forest structure and fuel loads starting after needle fall through one century after bark beetle infestation for three lodgepole pine-dominated forest types (pine, pine with aspen, pine with fir and spruce), and compared simulated effects of no-action and fuel reduction treatments (thinning, broadcast burning). In pine stands mixed with significant density of fir and spruce, the high canopy bulk density and low canopy base height increases passive and active crown fire hazards compared to stands with few shade tolerant trees. In contrast, stands of pine mixed with aspen had lower canopy bulk density and active crown fire hazard. All three forest types had high snag and coarse woody debris loads. Thinning and broadcast burning reduced canopy fuels in all forest types for several decades, but had the largest effect in forests with abundant fir. Burning temporarily reduced fine woody fuel, and caused a longer-term reduction in coarse wood and duff. Overall, these simulations indicate that management aimed at reducing canopy fuels in beetle-killed lodgepole pine forests should prioritize stands with high densities of overstory and understory fir and spruce. Forest growth following treatment requires frequent stand manipulation (as often as every 20 years) to maintain reduced fuel loads, and since such treatments are expensive and likely not analogous to natural disturbances these activities are most appropriate where resource and infrastructure protection and human safety concerns are high.

    Publication Notes

    • You may send email to to request a hard copy of this publication.
    • (Please specify exactly which publication you are requesting and your mailing address.)
    • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
    • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.


    Pelz, K. A.; Rhoades, C. C.; Hubbard, R. M.; Battaglia, M. A.; Smith, F. W. 2015. Species composition influences management outcomes following mountain pine beetle in lodgepole pine-dominated forests. Forest Ecology and Management. 336: 11-20.


    Google Scholar


    bark beetles, mountain pine beetle, fuel management, lodgepole pine, subalpine fir, Rocky mountains

    Related Search

    XML: View XML
Show More
Show Fewer
Jump to Top of Page