Skip to Main Content
Cellulose nanocrystal/polyolefin biocomposites prepared by solid-state shear pulverization: Superior dispersion leading to synergistic property enhancementsAuthor(s): Krishnan A. Iyer; Gregory T. Schueneman; John M. Torkelson
Source: Polymer, Volume 56, 2015; pp. 464-475.
Publication Series: Scientific Journal (JRNL)
Station: Forest Products Laboratory
PDF: Download Publication (1.87 MB)
Related Research Highlights
High-performance Cellulose Nanocrystal Polyolefin Composites are an Attractive Filler for Polymer Composites
DescriptionCellulose nanocrystals (CNCs), a class of renewable bionanomaterials with excellent mechanical properties, have gained major interest as filler for polymers. However, challenges associated with effective CNC dispersion have hindered the production of composites with desired property enhancements. Here, composites of polypropylene (PP) and low density polyethylene (LDPE) with 5e10 wt% unmodified CNC are produced for the first time via a solventless process. In particular, we employ solid-state shear pulverization (SSSP). Optical and electron microscopy reveals excellent CNC dispersion with strongly suppressed degradation relative to composites made by melt mixing. Effective dispersion leads to major increases in Young's modulus, including a 69% increase in 90/10 wt% LDPE/CNC composites relative to neat LDPE, the highest modulus enhancement ever reported for polyolefin/CNC composites. The composites also exhibit superior creep performance with modest increment in yield strength compared to neat polymer. The LDPE/CNC composites retain elongation at break values that are equal to that of neat polymer while a decrease is observed with PP/CNC composites. The CNC thermal degradation temperature in air is close to that of PP melt processing conditions. We hypothesize that during melt-processing CNCs undergo preferential thermo-oxidative degradation in LDPE and simultaneous degradation in PP. Thus, CNC incorporation results in impaired thermal stability in LDPE and, especially, PP. Care must be taken in selecting the post-SSSP melt processing temperature and residence time in order to suppress degradation. Taking that into account, this study has produced polyolefin/CNC composites with superior dispersion and property enhancements and shown that CNC is an attractive filler for green polymer biocomposites.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationIyer, Krishnan A.; Schueneman, Gregory T.; Torkelson, John M. 2015. Cellulose nanocrystal/polyolefin biocomposites prepared by solid-state shear pulverization: Superior dispersion leading to synergistic property enhancements. Polymer, Volume 56, 2015; pp. 464-475.
KeywordsCellulose nanocrystals, Composites, Polyolefins
- Mechanical and thermal properties of waterborne epoxy composites containing cellulose nanocrystals
- Rheological and thermo-mechanical properties of poly(lactic acid)/lignin-coated cellulose nanocrystal composites
- Influence of high loading of cellulose nanocrystals in polyacrylonitrile composite films
XML: View XML