Skip to Main Content
Collection of wood quality data by X-ray densitometry: a case study with three southern pinesAuthor(s): Thomas L. Eberhardt; Lisa J. Samuelson
Source: Wood Science and Technology
Publication Series: Scientific Journal (JRNL)
Station: Forest Products Laboratory
Download Publication (1 MB)
DescriptionX-ray densitometry is a technique often used in tree growth and wood quality studies to incrementally measure density (specific gravity) along a radial strip of wood. Protocols for this technique vary between laboratories because of differences in species, equipment, tree age, and other factors. Here, the application of X-ray densitometry is discussed in terms of a case study specific to the southern pines, whereby loblolly (Pinus taeda L), longleaf (Pinus palustris Mill.), and slash (Pinus elliottii Engelm.) pine wood cores were analyzed using an automated system. Objectives of this study included an assessment of the potential impacts on wholecore wood quality data from wood core extraction and use of two different demarcation methods (threshold and inflection point) for the earlywood–latewood transition. Wood core extraction before X-ray densitometry showed minimal impact on the shapes of individual ring profiles, and whole-core wood quality data were essentially unchanged. An assessment of the inflection point method employed for determining the earlywood–latewood transition point in the X-ray densitometry data demonstrated that the growth ring profiles for the southern pines are not amenable to polynomial fitting. Indeed, in the southern pines, the earlywood–latewood transitions are as equally abrupt as the latewood–earlywood transitions. Accordingly, a threshold density deemed appropriate to define the onset of a growth ring would be equally appropriate to define the onset of latewood formation.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationEberhardt, Thomas L.; Samuelson, Lisa J. 2015. Collection of wood quality data by X-ray densitometry: a case study with three southern pines. Wood Science and Technology. Volume 49, Number 4: pp. 739-753.
KeywordsDensity, earlywood, extraction, latewood, specific gravity
Specific gravity responses of slash and loblolly pine following mid-rotation fertilization
- Small topographic differences affect slash pine response to site preparation and fertilization
- Comparing morphology and physiology of southeastern US Pinus seedlings: implications for adaptation to surface fire regimes
XML: View XML