Skip to Main Content
U.S. Forest Service
Caring for the land and serving people

United States Department of Agriculture

Home > Search > Publication Information

  1. Share via EmailShare on FacebookShare on LinkedInShare on Twitter
    Dislike this pubLike this pub
    Author(s): James R. McKenna; Wayne A. Geyer; Keith E. Woeste; Daniel L. Cassens
    Date: 2015
    Source: Open Journal of Forestry. 05(05): 518-525.
    Publication Series: Scientific Journal (JRNL)
    Station: Northern Research Station
    PDF: Download Publication  (650.7 KB)


    Figured black walnut lumber is a specialty wood product that commands a high price for manufacturing fine furniture and interior paneling. Two common figured grain patterns occur in walnut; they are known as "fiddle-back" or "curly" grain, depending on the number of horizontal lines visible in the grain of the finished wood. The occurrence of figured walnut in nature is rare and unpredictable. Trees that have consistent figured patterns throughout the log are of exceptional value. Conversely, trees with partial or spotty figured patterns are considered defective and are reduced in value. Conventional breeding of seedlings, or cloning figured trees by grafting, are possible methods to propagate figured wood in walnut. The value of such material, however, will depend on figure being expressed predictably. For breeding to succeed, the trait of interest must be genetic and heritable. For clonal propagation to be effective, the trait must be reproduced true-to-type. In this study, we evaluate the grain pattern of both grafted and seedling walnut from several highly figured wild selections. Logs from grafted trees of three clones propagated in the 1970s in Kansas were evaluated. Only one log from one clone showed some figure in its lumber. Ten-year-old seedlings from the figured walnut clone "Lamb" were grown and cut in Indiana and evaluated for figured grain, and none showed any sign of figured grain developing. Our conclusion is that figured grain in black walnut does not propagate true-to-type through grafting or by growing open-pollinated seed. Although evidence of some genetic control of figure was found, environmental and other factors appear to play a greater role.

    Publication Notes

    • Check the Northern Research Station web site to request a printed copy of this publication.
    • Our on-line publications are scanned and captured using Adobe Acrobat.
    • During the capture process some typographical errors may occur.
    • Please contact Sharon Hobrla, if you notice any errors which make this publication unusable.
    • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
    • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.


    McKenna, James R.; Geyer, Wayne A.; Woeste, Keith E.; Cassens, Daniel L. 2015. Propagating figured wood in black walnut. Open Journal of Forestry. 05(05): 518-525.


    Google Scholar


    Juglans nigra, Figured Wood, Forestry Breeding, True-to-Type, Grafting, Clonal Forestry

    Related Search

    XML: View XML
Show More
Show Fewer
Jump to Top of Page