Skip to Main Content
A broad survey of hydraulic and mechanical safety in the xylem of conifersAuthor(s): Pauline S. Bouche; Maximilien Larter; Jean-Christophe. Domec; Regis Burlett; Peter Gasson; Steven Jansen; Sylvain Delzon
Source: Journal of Experimental Botany
Publication Series: Scientific Journal (JRNL)
Station: Southern Research Station
View PDF (1.0 MB)
DescriptionDrought-induced forest dieback has been widely reported over the last decades, and the evidence for a direct causal link between survival and hydraulic failure (xylem cavitation) is now well known. Because vulnerability to cavitation is intimately linked to the anatomy of the xylem, the main objective of this study was to better understand the xylem anatomical properties associated with cavitation resistance. An extensive data set of cavitation resistance traits and xylem anatomical properties was developed for 115 conifer species, with special attention given to the micro-morphology of bordered pits. The ratio of torus to pit aperture diameter, so-called torus overlap, increased with increasing cavitation resistance, while the flexibility of the margo does not seem to play a role, suggesting that air-seeding is located at the seal between the aspirated torus and pit aperture. Moreover, punctured tori were reported in various Pinaceae species. Species resistant to cavitation had thicker tracheid walls, while their lumen diameter (conduit size) was only slightly reduced, minimizing the impact on hydraulic conductance. The results also demonstrated (i) the existence of an indirect trade-off between hydraulic safety and mechanical strength; and (ii) a consistency between species distribution and xylem anatomy: species with a wide torus overlap and high valve effects are found in arid environments such as the Mediterranean region.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationBouche, Pauline S.; Larter, Maximilien; Domec, Jean-Christophe.; Burlett, Regis; Gasson, Peter; Jansen, Steven; Delzon, Sylvain 2014. A broad survey of hydraulic and mechanical safety in the xylem of conifers. Journal of Experimental Botany. 65(15): 4419-4431. 13 p. 10.1093/jxb/eru218
KeywordsCavitation resistance, hydraulic efficiency, mechanical strength, seal capillary-seeding, torus–margo pit, xylem anatomy, wall implosion
- Maximum height in a conifer is associated with conflicting requirements for xylem design
- Bordered pit structure and function determine spatial patterns of air-seeding thresholds in xylem of Douglas-fir (Pseudotsuga menziesii; Pinaceae) trees.
- Moving beyond the cambium necrosis hypothesis of post-fire tree mortality: cavitation and deformation of xylem in forest fires
XML: View XML