On-site energy consumption at softwood sawmills in MontanaAuthor(s): Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson
Source: Forest Products Journal. 66(3/4): 155-163.
Publication Series: Scientific Journal (JRNL)
Station: Rocky Mountain Research Station
Download Publication (490.0 KB)
Total on-site energy requirements for wood product manufacturing are generally not well understood or publicly available, particularly at subregional scales, such as the state level. This article uses a mail survey of softwood sawmills in Montana to develop a profile of all on-site energy consumption. Energy use is delineated by fuel type on a production basis for both renewable and nonrenewable sources for production year 2009. Survey respondents represented 92 percent of total Montana softwood lumber production of 449 million board feet, which is 4 percent of western US production and 2 percent of national production. Total annual on-site sawmill energy required was 1.6 trillion British thermal units. Seventy-seven percent was derived from wood and bark, primarily for process heat and steam for lumber drying; 16 percent was from electricity; 5 percent was from diesel used for on-site rolling stock; and the remainder was from gasoline, propane, and natural gas. Energy produced from renewable sources accounted for 86 percent of total on-site energy consumption. In addition to providing an energy profile of Montana sawmills for policymakers, aggregated results may be useful to individual firms in characterizing their energy requirements relative to the state average and in identifying potential opportunities for bioenergy expansion.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
Loeffler, Dan; Anderson, Nathaniel; Morgan, Todd A.; Sorenson, Colin B. 2016. On-site energy consumption at softwood sawmills in Montana. Forest Products Journal. 66(3/4): 155-163.
Keywordsenergy consumption, sawmills, wood product manufacturing, bioenergy
- On-site energy consumption and selected emissions at softwood sawmills in the southwestern United States
- Cradle-to-gate life-cycle inventory of U.S. wood products production: CORRIM phase I and phase II products
- Environmental impact of manufacturing softwood lumber in northeastern and north central United States
XML: View XML