Skip to Main Content
Due to a lapse in federal funding, this USDA website will not be actively updated. Once funding has been reestablished, online operations will continue.
The use of gas-sensor arrays in the detection of bole and root decays in living trees: development of a new non-invasive method of sampling and analysisAuthor(s): Manuela Baietto; Sofia Aquaro; Dan Wilson; Letizia Pozzi; Danieli Bassi
Source: Sensors & Transducers
Publication Series: Scientific Journal (JRNL)
Station: Southern Research Station
PDF: View PDF (371.0 KB)
DescriptionWood rot is a serious fungal disease of trees. Wood decay fungi penetrate and gain entry into trees through pruning cuts or open wounds using extracellular digestive enzymes to attack all components of the cell wall, leading to the destruction of sapwood which compromises wood strength and stability. On living trees, it is often difficult to diagnose wood rot disease, particularly during extreme weather conditions when trees can fail, causing tree parts to fall onto people and property. Today, tree stability evaluation and inner decay detection are performed visually and by the use of commercial instruments and methods that are often invasive, timeconsuming and sometimes inadequate for use within the urban environment. Moreover, most conventional instruments do not provide an adequate evaluation of decay that occurs in the root system. A long-term research project, initiated in 2004, was aimed at developing a novel approach for diagnosing inner tree decays by detecting differences in volatile organic compounds (VOCs) released by wood decay fungi and wood from healthy and decayed trees. Different commercial electronic noses (ENs) were tested under laboratory conditions and directly in the field, on healthy and artificially-inoculated stem wood chips, and root fragments. The first stage of the research was focused on testing different commercially available electronic noses (e-noses) for the capabilities of discriminating between different strains and species of wood decay fungi as well as sapwood belonging to different tree species. In the second stage, sapwood of different tree species was artificially inoculated with decay fungi to test the diagnostic ability of the e-noses to detect differences in aroma bouquets emitted by healthy and inoculated woods. Root fragments were then inoculated with specific root decaying fungi and incubated under different types of soils to assess whether soil odors could influence the ability of the e-nose to discriminate between non-inoculated and diseased root fragments. For the final stage, soil air was evaluated for the presence of VOCs released by root-decaying fungi on diseased standing trees cultivated in the urban
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationBaietto, Manuela; Aquaro, Sofia; Wilson, A. Dan; Pozzi, Letizia; Bassi, Daniele. 2015. The use of gas-sensor arrays in the detection of bole and root decays in living trees: development of a new non-invasive method of sampling and analysis. Sensors & Transducers 193(10):154-160. 7 p.
KeywordsElectronic nose, Decay detection, Urban forestry, VOCs, Tree
- Evaluation of a portable MOS electronic nose to detect root rots in shade tree species
- Evaluation of three electronic noses for detecting incipient wood decay
- Evaluation of the diagnostic feasibility of the electronic nose in detecting incipient decay of artificially inoculated wood
XML: View XML