Skip to Main Content
Recovery of Picloram and 2,4-Dichlorophenoxyacetic Acid from Aqueous Samples by Reversed-Phase Solid-Phase ExtractionAuthor(s): Martha J.M. Wells; Jerry L. Michael
Source: Analytical Chemistry. 59: 1739-1742
Publication Series: Miscellaneous Publication
PDF: Download Publication (194 KB)
DescriptionExtensive preparation of samples before chromatographic analysis is usually the most time-consuming process in the determination of many organic compounds in environmental matrices. In the past, removal of some organic from aqueous solution was commonly done by liquid/liquid extraction. However, the introduction of stable, covalently bonded reversed-phase sorbents now allows efficient removal of hydrophobic compounds from aqueous solution by adsorption anachromatographic support. Solid-phase extraction is not anew technique. However, the procedure is more convenient today because of the commercial availability of ancillary equipment and prepackaged disposable adsorption cartridges ins variety of sorbents (1, 2).
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationWells, Martha J.M.; Michael, Jerry L. 1987. Recovery of Picloram and 2,4-Dichlorophenoxyacetic Acid from Aqueous Samples by Reversed-Phase Solid-Phase Extraction. Analytical Chemistry. 59: 1739-1742
- Liquid phase in situ hydrodeoxygenation of biomass-derived phenolic compounds to hydrocarbons over bifunctional catalysts
- Pelletized ponderosa pine bark for adsorption of toxic heavy metals from water
- Adsorption mechanism of cadmium on juniper bark and wood
XML: View XML