Skip to Main Content
U.S. Forest Service
Caring for the land and serving people

United States Department of Agriculture

Home > Search > Publication Information

  1. Share via EmailShare on FacebookShare on LinkedInShare on Twitter
    Dislike this pubLike this pub
    Author(s): P. O. Currie; M. J. Morris; D. L. Neal
    Date: 1973
    Source: Grass and Forage Science. 28: 155-160.
    Publication Series: Scientific Journal (JRNL)
    Station: Rocky Mountain Forest and Range Experiment Station
    PDF: Download Publication  (1.0 MB)

    Description

    An electronic capacitance meter was used to estimate herbage yield from sown ranges in western USA. On an area in Arizona where the grass stand had been sown broadcast, ^a r2 of 0-47 was obtained between the meter value and oven-dry weight estimate. Excluding those plots with very large amounts of standing dead organic matter (OM), or very succulent plants which bad not been sown, improved yield estimates. Tests on pastures in Colorado in which seed had been drilled and the meter tested to evaluate performance in relation to drill rows showed that a common regression could be used for estimating yield. Methods of placing the meter in relation to row directions are described which avoid a biased estimate of total pasture yield. Cutting the herbage in a 3-dimensional manner improved the r2 values over those obtained by the usual 2-dimensional cutting procedure. Separation of dead OM from living plant material did not significantly change the r2 values and showed that dead OM bad very little influence on the meter reading. This dead OM can contribute significantly to variation of the estimate about the regression line, however, and if differences in dead OM are substantial, sample sizes may need to be increased or sampling stratified to obtain an accurate yield estimate. Pertinent literature on the evolution of electronic capacitance instruments for estimating herbage yields bas been presented in Part 1 of this series (3). The present evaluation is restricted to the herbage yield estimates from mechanically sown pastures. The Neal Electronics Model 18-612 meter was used to make the yield estimates.

    Publication Notes

    • You may send email to rmrspubrequest@fs.fed.us to request a hard copy of this publication.
    • (Please specify exactly which publication you are requesting and your mailing address.)
    • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
    • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

    Citation

    Currie, P. O.; Morris, M. J.; Neal, D. L. 1973. Uses and capabilities of electronic capacitance instruments for estimating standing herbage. Grass and Forage Science. 28: 155-160.

    Keywords

    capacitance instruments, herbage yield, sown ranges, yield estimates

    Related Search


    XML: View XML
Show More
Show Fewer
Jump to Top of Page
https://www.fs.usda.gov/treesearch/pubs/53211