Skip to Main Content
Cradle-to-grave life cycle assessment of syngas electricity from woody biomass residuesAuthor(s): Hongmei Gu; Richard Bergman
Source: Wood and Fiber Science. 49(2), 2017: 177-192.
Publication Series: Scientific Journal (JRNL)
Station: Forest Products Laboratory
PDF: Download Publication (1.0 MB)
DescriptionForest restoration and fire suppression activities in the western United States have resulted in large volumes of low-to-no value residues. An environmental assessment would enable greater use while maintaining environmental sustainability of these residues for energy products. One internationally accepted sustainable metric tool that can assess environmental impacts of new bioenergy conversion systems is the life cycle assessment (LCA). Using the LCA method, this study evaluated the synthesis gas (syngas) electricity produced via a distributed-scale biomass thermochemical conversion system called the Tucker renewable natural gas (RNG) system. This system converts woody biomass in a high-temperature and extremely low-oxygen environment to a medium-energy syngas that is burned to generate electricity. The system also produced biochar as a byproduct and tar as a waste. Results from the life cycle impact assessment included an estimate of the global warming (GW) from the cradle-to-grave production of syngas for electricity. When the carbon sequestration effect from the biochar by-product was included, GW impact value (0.330 kg CO2-eq/kWh) was notably lower compared with electricity generated from bituminous coal (1.079 kg CO2-eq/kWh) and conventional natural gas (0.720 kg CO2-eq/kWh). Other environmental impacts showed that syngas electricity ranged between the direct-biomass-burned electricity and fossil-fuel-combusted electricity for different impact categories. This occurred because, although the woody biomass feedstock was from a renewable resource with less environmental impact, propane was consumed during the thermochemical conversion. Specifically, the evaluation showed that the highest greenhouse gas (GHG) emissions contribution came from burning propane that was used to maintain the endothermic reaction in the Tucker RNG unit. If the tar waste from the system were converted into a low-energy syngas and used to supplement propane consumption, a further decrease of 41% in GHG emissions (ie fossil CO2) could be achieved in this cradle-to-grave assessment.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationGu, Hongmei; Bergman, Richard. 2017. Cradle-to-grave life cycle assessment of syngas electricity from woody biomass residues. Wood and Fiber Science. 49(2): 177-192.
KeywordsBioenergy, woody biomass, syngas electricity, life cycle analysis, environmental assessment
- Life-cycle GHG emissions of electricity from syngas produced by pyrolyzing woody biomass
- Life-Cycle Assessment of a Distributed-Scale Thermochemical Bioenergy Conversion System
- Comparative life-cycle assessment of biochar activated carbon and synthesis gas electricity with commercially available alternatives
XML: View XML