Skip to Main Content
Rapid and near-complete dissolution of wood lignin at ≤80°C by a recyclable acid hydrotropeAuthor(s): Liheng Chen; Jinze Dou; Qianli Ma; Ning Li; Ruchun Wu; Huiyang Bian; Daniel J. Yelle; Tapani Vuorinen; Shiyu Fu; Xuejun Pan; Junyong (J.Y.) Zhu
Source: Science Advances, 2017. 3: 1-11.
Publication Series: Scientific Journal (JRNL)
Station: Forest Products Laboratory
PDF: Download Publication (4.0 MB)
Related Research Highlights
Scientists discover rapid and near-complete dissolution of wood lignin by a recyclable acid hydrotrope
DescriptionWe report the discovery of the hydrotropic properties of a recyclable aromatic acid, p-toluenesulfonic acid (p-TsOH), for potentially low-cost and efficient fractionation of wood through rapid and near-complete dissolution of lignin. Approximately 90% of poplar wood (NE222) lignin can be dissolved at 80°C in 20 min. Equivalent delignification using known hydrotropes, such as aromatic salts, can be achieved only at 150°C or higher for more than 10 hours or at 150°C for 2 hours with alkaline pulping. p-TsOH fractionated wood into two fractions: (i) a primarily cellulose-rich water-insoluble solid fraction that can be used for the production of high-value building blocks, such as dissolving pulp fibers, lignocellulosic nanomaterials, and/or sugars through subsequent enzymatic hydrolysis; and (ii) a spent acid liquor stream containing mainly dissolved lignin that can be easily precipitated as lignin nanoparticles by diluting the spent acid liquor to below the minimal hydrotrope concentration. Our nuclear magnetic resonance analyses of the dissolved lignin revealed that p-TsOH can depolymerize lignin via ether bond cleavage and can separate carbohydrate-free lignin from the wood. p-TsOH has a relatively low water solubility, which can facilitate efficient recovery using commercially proven crystallization technology by cooling the concentrated spent acid solution to ambient temperatures to achieve environmental sustainability through recycling of p-TsOH.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationChen, Liheng; Dou, Jinze; Ma, Qianli; Li, Ning; Wu, Ruchun; Bian, Huiyang; Yelle, Daniel J.; Vuorinen, Tapani; Fu, Shiyu; Pan, Xuejun; Zhu, Junyong (J.Y.) 2017. Rapid and near-complete dissolution of wood lignin at ≤80°C by a recyclable acid hydrotrope. Science Advances. 3: 1-11.
KeywordsFractionation/pretreatment biomass, delignification, dissolving pulp fibers, cellulose nanomaterials/fibrils, lignin nanoparticles, hydrotrope, enzymatic hydrolysis
- Producing wood-based nanomaterials by rapid fractionation of wood at 80 °C using a recyclable acid hydrotrope
- Co-production of bioethanol and furfural from poplar wood via low temperature (≤90 °C) acid hydrotropic fractionation (AHF)
- Toward sustainable and complete wood valorization by fractionating lignin with low condensation using an acid hydrotrope at low temperatures (≤80 °C)
XML: View XML