Skip to Main Content
Drying hardwood lumberAuthor(s): Joseph Denig; Eugene M. Wengert; William T. Simpson
Source: (General technical report FPL ; GTR-118):iv, 138 p. : ill. ; 28 cm.
Publication Series: General Technical Report (GTR)
Station: Forest Products Laboratory
Download Publication (1.6 MB)
DescriptionDrying Hardwood Lumber focuses on common methods for drying lumber of different thickness, with minimal drying defects, for high quality applications. This manual also includes predrying treatments that, when part of an overall quality-oriented drying system, reduce defects and improve drying quality, especially of oak lumber. Special attention is given to drying white wood, such as hard maple and ash, without sticker shadow or other discoloration. Several special drying methods, such as solar drying, are described, and proper techniques for storing dried lumber are discussed. Suggestions are provided for ways to economize on drying costs by reducing drying time and energy demands when feasible. Each chapter is accompanied by a list of references. Some references are cited in the chapter; others are listed as additional sources of information.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationDenig, Joseph.; Wengert, Eugene M.; Simpson, William T. 2000. Drying hardwood lumber. (General technical report FPL ; GTR-118):iv, 138 p. : ill. ; 28 cm.
KeywordsHardwoods, Lumber, Drying methods, Kilns, Warping, Wood defects
XML: View XML