Skip to Main Content
Properties of kenaf from various cultivars, growth and pulping conditionsAuthor(s): James S. Han; Ernest S. Miyashita; Sara J. Spielvogel
Source: [Kenaf properties, processing and products. Mississippi State, MS : Mississippi State University, Ag & Bio Engineering, 1999].:p. -283 : ill.
Publication Series: Miscellaneous Publication
PDF: Download Publication (225 KB)
DescriptionThe physical properties of kenaf offer potential as an alternative raw material for the manufacture of paper. Investigations to date have not determined whether core and fiber should be pulped together or separately. Kenaf bast and core fibers of different cultivars were pulped under various kraft pulping conditions and physical properties: density, Canadian Standard freeness, caliper, elongation, tensile strength, tensile index, tensile energy absorption, ISO brightness, printing opacity, bursting strength, burst index, tear resistance, tearing index, and smoothness of the test sheets were measured/analyzed in order to determine the optimum pulping conditions.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHan, James S.; Miyashita, Ernest S.; Spielvogel, Sara J. 1999. Properties of kenaf from various cultivars, growth and pulping conditions. [Kenaf properties, processing and products. Mississippi State, MS : Mississippi State University, Ag & Bio Engineering, 1999].:p. -283 : ill.
KeywordsPaper, Kenaf, Physical properties, Cultivars, Growth rate, Pulping
- Determining the minimum conditions for soda-anthraquinone pulping of kenaf bast, core, and whole stalk fibers
- Biomechanical pulping of kenaf
- Fiber length strength interrelationship for slash pine and its effect on pulp-sheet properties
XML: View XML