Skip to Main Content
-
Techno-economic analysis of producing solid biofuels and biochar from forest residues using portable systems
Author(s): Kamalakanta Sahoo; Edward Bilek; Richard Bergman; Sudhagar Mani
Date: 2019
Source: Applied Energy. 235: 578-590.
Publication Series: Scientific Journal (JRNL)
Station: Forest Products Laboratory
PDF: Download Publication (3.0 MB)Description
Wildfires are getting extreme and more frequent because of increased fuel loads in the forest and extended dry conditions. Prevention of wildfire by fuel treatment methods will generate forest residues in large volumes, which in addition to available logging residues, can be used to produce biofuels and bioproducts. In this study, the techno-economic assessment of three portable systems to produce woodchips briquettes (WCB), torrefiedwoodchips briquettes (TWCB) and biochar from forest residues were evaluated using pilot-scale experimental data. A discounted cash flow rate of return method was used to estimate minimum selling prices (MSPs) for each product, to conduct sensitivity analyses, and to identify potential cost-reduction strategies. Using a before-finance- and-tax 16.5% nominal required return on investment, and a mean transport distance of 200 km, the estimated delivered MSPs per oven-dry metric ton (ODMT) of WCB, TWCB, and biochar were $162, $274, and $1044 respectively. The capital investment (16–30%), labor cost (23–28%), and feedstock cost (10–13%) without stumpage cost were the major factors influencing the MSP of solid biofuels and biochar. However, the MSPs of WCB, TWCB, and biochar could be reduced to $65, $145, and $470/ODMT respectively with technologically improved portable systems. In addition, the MSPs of solid biofuels and biochar could be further reduced by renewable energy and carbon credits, if the greenhouse gas (GHG) reduction potentials are quantified and remunerated. In conclusion, portable systems could be economically feasible to use forest residues and make useful products at current market prices while simultaneously reducing potential wildfires and GHG emissions.Publication Notes
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
Citation
Sahoo, Kamalakanta; Bilek, Edward; Bergman, Richard; Mani, Sudhagar. 2019. Techno-economic analysis of producing solid biofuels and biochar from forest residues using portable systems. Applied Energy. 235: 578-590.Cited
Keywords
Portable biomass conversion technology (BCT), briquettes, torrefied briquettes, biochar, techno-economic analysis, forest residuesRelated Search
- Life-cycle assessment and techno-economic analysis of biochar produced from forest residues using portable systems
- Impact of co‐product selection on techno‐economic analyses of alternative jet fuel produced with forest harvest residuals
- Productivity and cost analysis of a mobile pyrolysis system deployed to convert mill residues into biochar
XML: View XML
Show More
Show Fewer
https://www.fs.usda.gov/treesearch/pubs/57592