Skip to Main Content
Plans for crash-tested bridge railings for longitudinal wood decks on low-volume roadsAuthor(s): Michael A. Ritter; Ronald K. Faller; Steve. Bunnell; Paula D. Hilbrich Lee; Barry T. Rosson
Source: (General technical report FPL ; GTR-107):11 p. : plans ; 44 x 28 cm.
Publication Series: General Technical Report (GTR)
Station: Forest Products Laboratory
View PDF (251 KB)
DescriptionThe plans for crashworthy bridge railings for low-volume roads were developed through a cooperative research program involving the USDA Forest Service, Forest Products Laboratory (FPL); the Midwest Roadside Safety Facility, University of Nebraska-Lincoln (MwRSF); and the Forest Service, National Forest System, Engineering. Three railings were developed and successfully tested in accordance with National Cooperative Highway Research Program (NCHRP) Report 350 Test Level-1 requirements. The fourth system was developed for a lower test level based on criteria developed by the Forest Service for single-lane bridges on very low-volume roads. For the convenience of the user, full drawing sets are provided in customary U.S. and S.I. units.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationRitter, Michael A.; Faller, Ronald K.; Bunnell, Steve.; Hilbrich Lee, Paula D.; Rosson, Barry T. 1998. Plans for crash-tested bridge railings for longitudinal wood decks on low-volume roads. (General technical report FPL ; GTR-107):11 p. : plans ; 44 x 28 cm.
- Plans for crash-tested wood bridge railings for concrete decks
- Railing systems for use on timber deck bridges
- Two test level 4 bridge railing and transition systems for transverse timber deck bridges
XML: View XML