Skip to Main Content
Bench-scale measurement of pyrolysis products from intact live fuelsAuthor(s): Thomas H. Fletcher; Mohammad-Saeed Safdari; Elham Amini; David R. Weise
Source: Advances in Forest Fire Research 2018
Publication Series: Scientific Journal (JRNL)
Station: Pacific Southwest Research Station
PDF: Download Publication (331.0 KB)
DescriptionPrescribed burning (controlled burning) is used to decrease accumulation of combustible materials and reduce impact of uncontrolled wildland fires. Prescribed fires are often used to burn undergrowth in southern forests of the United States. In order to improve prescribed fire application, accomplish desired fire effects, and limit potential runaway fires, an improved understanding of the fundamental processes related to combustion of heterogeneous fuel beds of live and dead fuels is needed. The initial processes of combustion involve pyrolysis and ignition. During this research, fast pyrolysis of 14 live and dead (biomass) plant species which are native to the southern United States have been studied using a flat-flame burner (FFB) apparatus. The FFB apparatus enables experiments at a high heating rate (~100°C s-1, or ~100 kW m-2) and moderate temperature (~765°C) to imitate pyrolysis during typical fire spread conditions. Pyrolysis products have been analyzed in detail using a gas chromatograph equipped with a mass spectrometer (GC-MS) for analysis of tars, and a gas chromatograph equipped with a thermal conductivity detector (GC-TCD) for analysis of permanent (light or non-condensable) gases. Differences between yields of light gas species were small between plant species. Composition of tars included aromatic compounds with 1 to 5 rings with very few attachments. The pyrolysis products observed at this temperature and heating rate appear to have experienced secondary pyrolysis. The tar composition showed some large changes with plant species. Comparison of products from pyrolysis of live vegetation and dead vegetation of the same plant species showed differences in tar, gas, and char yields, but no major changes in the types of chemical compounds observed.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationFletcher, Thomas H.; Safdari, Mohammad-Saeed; Amini;Elham; Weise, David R. 2018. Bench-scale measurement of pyrolysis products from intact live fuels. In: Viegas, D. X., ed. Advances in Forest Fire Research 2018. Coimbra, Portugal: Imprensa da Universidade de Coimbra: 1223-1226.
Keywordspyrolysis, live shrubs
- Characterization of pyrolysis products from fast pyrolysis of live and dead vegetation native to the Southern United States
- Characterization of pyrolysis products from slow pyrolysis of live and dead vegetation native to the southern United States
- Comparison of pyrolysis of live wildland fuels heated by radiation vs. convection
XML: View XML