Skip to Main Content
Wall and corner fire tests on selected wood productsAuthor(s): H. C. Tran; M. L. Janssens
Source: Journal of fire sciences. Vol. 9 (Mar./Apr. 1991):p. -124.
Publication Series: Miscellaneous Publication
PDF: Download Publication (173 KB)
DescriptionAs part of a fire growth program to develop and validate a compartment fire model, several bench-scale and full-scale tests were conducted. This paper reports the full-scale wall and corner test results of step 2 of this study. A room fire test following the ASTM proposed standard specifications was used for these full-scale tests. In step 1, we investigated the combination of factors for evaluating wood products in wall and corner fire tests. They were the position of the ignition sources power output from the source, and combination of lining materials. We concluded from the sensitivity study (step 1) that for wall and corner fire tests, a burner output program consisting of 40 kW exposure for 5 min followed by 160 kW exposure for 5 min was the most informative. In this paper, step 2 of the research program, results from wall and corner tests using six wood materials having different flame spread indices (according to ASTM E 84) are given. The two-step burner setting was confirmed to be better than a constant setting for evaluating wood materials. The relative performance of these materials was in line with thier ASTM E 84 flame spread propeties. Smoke release rates obtained by white-light and laser systems showed excellent agreement. Only rate of heat and smoke release, selected temperatures, and heat fluxes are reported. The complete reduced data set will be published later.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationTran, H. C.; Janssens, M. L. 1991. Wall and corner fire tests on selected wood products. Journal of fire sciences. Vol. 9 (Mar./Apr. 1991):p. -124.
KeywordsWood products, Wallboards, Plywood, Walls, Fires, Fire behavior, Fire effects, Models, FIre models, Fire testing, Room fire tests, Fire growth, Compartment fire, Fire resistance
- Room fire test for fire growth modeling : a sensitivity study
- Correlation of smoke development in room tests with cone calorimeter data for wood products
- Room/corner tests of wall linings with 100/300 kW burner
XML: View XML