Skip to Main Content
Strength and durability of one-part polyurethane adhesive bonds to woodAuthor(s): C. B. Vick; E. A. Okkonen
Source: Forest products journal. Vol. 48, nos. 11/12 (Nov./Dec. 1998).:p. 71-76.
Publication Series: Miscellaneous Publication
PDF: View PDF (103 KB)
DescriptionOne-part polyurethane wood adhesives comprise a new class of general purpose consumer products. Manufacturersa claims of waterproof bonds brought many inquiries to the Forest Products Laboratory (FPL) from users constructing aircraft, boats, lawn furniture, and other laminated materials for outdoor use. Although FPL has technical information on several types of polyurethane and isocyanate-based adhesives for wood, no information was available on this new class of adhesives. Four commercial polyurethane adhesives, along with a resorcinol-formaldehyde adhesive to represent a standard of performance, were subjected to a series of industry-accepted tests that assess varying levels of bond strength and durability. In bonds to yellow birch and Douglas-fir, the polyurethanes did not differ significantly from each other in their performance; as a group, though, their dry shear strengths showed that they were significantly stronger than the resorcinol. Dry wood failures by the polyurethanes were high and did not differ significantly from the resorcinol. After three water-saturating procedures, wet shear strengths of polyurethanes and the resorcinol were statistically comparable. Wet wood failures, however, were very low among polyurethanes, which is a sharp contrast to the high wood failure by the resorcinol. A moderately severe delamination test indicated varying levels of water resistance among the polyurethanes, but the resorcinol was completely resistant to delamination. A very severe cyclic delamination test caused severe delamination of polyurethane bonds. However, a recently discovered hydroxymethylated resorcinol (HMR) coupling agent dramatically increased delamination resistance of polyurethane adhesives. In a test of resistance to deformation under static loads, polyurethane bonds withstood extreme exposures of temperature and relative humidity for 60 days without deformation.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationVick, C. B.; Okkonen, E. A. 1998. Strength and durability of one-part polyurethane adhesive bonds to wood. Forest products journal. Vol. 48, nos. 11/12 (Nov./Dec. 1998).:p. 71-76.
KeywordsAdhesives, Glued joints, Bond strength., Polyurethanes
- Durability of one-part polyurethane bonds to wood improved by HMR coupling agent
- Effect of changing slope of grain on ash, maple, and yellow birch in bending strength
- Crosscut shearing of roundwood bolts.
XML: View XML