Skip to Main Content
U.S. Forest Service
Caring for the land and serving people

United States Department of Agriculture

Home > Search > Publication Information

  1. Share via EmailShare on FacebookShare on LinkedInShare on Twitter
    Dislike this pubLike this pub
    Author(s): James A. WestfallAndrew J. Lister; Charles T. Scott; Thomas A. Weber
    Date: 2019
    Source: European Journal of Forest Research
    Publication Series: Scientific Journal (JRNL)
    Station: Northern Research Station
    PDF: Download Publication  (795.0 KB)

    Description

    Many national forest inventories (NFI) use auxiliary data to increase the precision of estimates. Typically, this is accomplished via stratified estimation techniques that rely on assignment of similar sample plot observations to strata constructed with the goal of lowering the variance of estimates. While early applications of stratification used strata constructed from photointerpretation of aerial photography, current technology makes using wall-to-wall digital map information more appealing due to automated processing capabilities; however, there is generally a reduction in classification accuracy in comparison with photo-interpretation and a concomitant decrease in the precision of estimates. While most established NFI have permanent plots and employ post-stratification (PS) with stratum weights known from a map, it is unclear what are the compromises compared to using a photo-interpretation (PI) approach. In this study, differences in cost and precision were evaluated for post-stratification using strata derived from a digital map and double sampling for post-stratification (DSPS) with strata created from PI of aerial imagery. It was found that DSPS consistently provided better precision than PS for estimates of total biomass and forestland area with approximately 13 PI points per sample plot, which incurred a cost increase equivalent to 0.5% per ground plot. Increasing the number of PI points per plot resulted in further gains in precision, with cost increases proportional to the PI intensity. To attain specific precision goals, DSPS was generally less costly than increasing the sample size under PS, although the PS design was more cost-effective if the PI intensity was too low. The results of this study provide a decision framework for inventory planners considering sampling designs that rely on post-stratified estimation.

    Publication Notes

    • Check the Northern Research Station web site to request a printed copy of this publication.
    • Our on-line publications are scanned and captured using Adobe Acrobat.
    • During the capture process some typographical errors may occur.
    • Please contact Sharon Hobrla, shobrla@fs.fed.us if you notice any errors which make this publication unusable.
    • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
    • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

    Citation

    Westfall, James A.; Lister, Andrew J.; Scott, Charles T.; Weber, Thomas A. 2019. Double sampling for post-stratification in forest inventory. European Journal of Forest Research. 138(3): 375-382. https://doi.org/10.1007/s10342-019-01171-9.

    Cited

    Google Scholar

    Keywords

    Photo-interpretation, Estimator variance, Cost:precision, Remote sensing

    Related Search


    XML: View XML
Show More
Show Fewer
Jump to Top of Page
https://www.fs.usda.gov/treesearch/pubs/60551