Skip to Main Content
Tree height increment models for national forest inventory data in the Pacific Northwest, USAAuthor(s): Hyeyoung Woo; Bianca N. I Eskelson; Vicente J. Monleon
Source: Forests. 11(1): 2-.
Publication Series: Scientific Journal (JRNL)
Station: Pacific Northwest Research Station
Download Publication (1.0 MB)
DescriptionThe United States national inventory program measures a subset of tree heights in each plot in the Pacific Northwest. Unmeasured tree heights are predicted by adding the difference between modeled tree heights at two measurements to the height observed at the first measurement. This study compared different approaches for directly modeling 10-year height increment of red alder (RA) and ponderosa pine (PP) in Washington and Oregon using national inventory data from 2001–2015. In addition to the current approach, five models were implemented: nonlinear exponential, log-transformed linear, gamma, quasi-Poisson, and zero-inflated Poisson models using both tree-level (e.g., height, diameter at breast height, and compacted crown ratio) and plot-level (e.g., basal area, elevation, and slope) measurements as predictor variables. To account for negative height increment observations in the modeling process, a constant was added to shift all response values to greater than zero (log-transformed linear and gamma models), the negative increment was set to zero (quasi-Poisson and zero-inflated Poisson models), or a nonlinear model, which allows negative observations, was used. Random plot effects were included to account for the hierarchical data structure of the inventory data. Predictive model performance was examined through cross-validation. Among the implemented models, the gamma model performed best for both species, showing the smallest root mean square error (RSME) of 2.61 and 1.33 m for RA and PP, respectively (current method: RA—3.33 m, PP—1.40 m). Among the models that did not add the constant to the response, the quasi-Poisson model exhibited the smallest RMSE of 2.74 and 1.38 m for RA and PP, respectively. Our study showed that the prediction of tree height increment in Oregon and Washington can be improved by accounting for the negative and zero height increment values that are present in inventory data, and by including random plot effects in the models.
- Visit PNW's Publication Request Page to request a hard copy of this publication.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationWoo, Hyeyoung; Eskelson, Bianca N. I.; Monleon, Vicente J. 2019. Tree height increment models for national forest inventory data in the Pacific Northwest, USA. Forests. 11(1): 2-. https://doi.org/10.3390/f11010002.
KeywordsForest Inventory and Analysis (FIA), tree-level increment, random plot effect, negative increment, gamma model, quasi-Poisson model, zero-inflated Poisson model.
- Brush control on forest lands with emphasis on promising methods for the Pacific Northwest: a review of selected references.
- Limited evaluation of physical and mechanical properties of Nepal alder grown in Hawaii
- Erosion rates of wood during natural weathering. Part II, Earlywood and latewood erosion rates
XML: View XML