Skip to Main Content
Classifying defects in pallet stringers by ultrasonic scanningAuthor(s): Mohammed F. Kabir; Daniel L. Schmoldt; Philip A. Araman; Mark E. Schafer; Sang-Mook Lee
Source: Wood and Fiber Science. 35(3): 341-350.
Publication Series: Miscellaneous Publication
PDF: View PDF (333.3 KB)
DescriptionDetecting and classifying defects are required to grade and sort pallet parts. Use of quality parts can extend the life cycle of pallets and can reduce long-term cost. An investigation has been carried out to detect and classify defects in yellow-poplar (Liriodendron tulipifera, L.) and red oak (Quercus rubra, L.) stringers using ultrasonic scanning. Data were collected for sound and unsound knots, bark pockets, decay, holes, and wane using rolling transducers in a pitch-catch arrangement. Data from eight ultrasonic variables—energy, pulse length, time of flight (TOF)-amplitude, TOF-energy, TOFcentroid, energy value, energy pulse value, and peak frequency—were used to classify defects. Three different types of classifiers were used to categorize defects—a multi-layer perceptron network (MLP), a probabilistic neural network (PNN), and a k-nearest neighbor (KNN) classifier. Mean values for the energy variables demonstrated statistically significant differences between clear wood and defects and among defect types. Mean values for the TOF variables did not differ significantly between clear wood and knots. All three types of classifiers were able to distinguish defected from clear wood in oak with accuracies above 95%; accuracies for yellow-poplar were somewhat lower for the MLP and PNN classifiers. Among the defect classes, decay exhibited the highest recognition rate for both yellowpoplar and oak. Wane and holes in oak were readily confused owing to their common loss of transducer contact. Overall accuracy at the data-point level varied from 69–78%. Simple post-processing operations are expected to improve that substantially. Based on accuracy performance alone, the MLP and KNN appear equally preferable for this task.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKabir, Mohammed F.; Schmoldt, Daniel L.; Araman, Philip A.; Schafer, Mark E.; Lee, Sang-Mook. 2003. Classifying defects in pallet stringers by ultrasonic scanning. Wood and Fiber Science. 35(3): 341-350.
- Ultrasound pallet part evaluator/grader and cant scanner
- Unsound defect volume in hardwood pallet cants
- Comparison of lumber values for Grade-3 hardwood logs from thinnings and mature stands
XML: View XML