Skip to Main Content
U.S. Forest Service
Caring for the land and serving people

United States Department of Agriculture

Home > Search > Publication Information

  1. Share via EmailShare on FacebookShare on LinkedInShare on Twitter
    Dislike this pubLike this pub
    Author(s): B. Rummer; K. Outcalt; D. Brockway
    Date: 2002
    Source: In: New century: new opportunities: 55th annual southern weed science society meeting; 2002 January 28-30; Atlanta, GA. Champaign, IL: Southern Weed Science Society: 76 [Abstract].
    Publication Series: Miscellaneous Publication
    PDF: Download Publication  (14 KB)


    There are many forest stands where exclusion of fire or lack of management has led to dense understorys and fuel accumulation. Generally, the least expensive treatment is to introduce a regime of prescribed fire as a surrogate for natural forest fire processes in these stands. However, in some cases prescribed fire is not an option. For example, heavy fuel loadings may require some kind of pre-treatment before prescribed fire can be safely introduced. Restrictions on burning and smoke in the urban interface may preclude the use of prescribed fire in any condition. In these situations, mechanical methods to reduce understory materials are an option for resource managers.

    There are a wide variety of machines that can be adapted for use in forest fuel treatment. They vary in size, cutter type, type of prime mover, and the attachment of the cutterhead. These differences affect the cost of the treatment, impact on the residual stand, degree of fuel reduction and the need for subsequent treatments. Two study sites were installed to examine some of these effects. On the Kisatchie National Forest, a rubber-tracked mulching machine was compared to a rubber-tired mulching machine utilizing the same cutterhead. At Ft. Benning, GA, a high-horsepower rubber-tired mulching machine was used to treat two blocks in mixed pine-hardwood. Vegetative surveys were conducted before and after treatment on all plots. The Ft. Benning site was divided into subplots to examine the effect of varying intervals before the reintroduction of prescribed fire.

    Treatment costs with the three different machines ranged from $120 to $350 per acre. Terrain limitations affected the machine requirements with soft soils and steep slopes resulting in delays and reduced productivity. Vegetative assessment on the Kisatchie found hardwood density was reduced by 33% in the midstory and 64% in the understory. Herbaceous cover did not increase in the treated areas, although there was a small increase in understory species richness. It appears the readjustment of understory composition to a more herbaceous-dominated layer will take more time and/or additional treatments to accomplish.

    This work was partially supported by funding from the Joint Fire Sciences Program. In addition, the support and assistance of the Winn District, Kisatchie National Forest, LA and of the Natural Resources staff at Ft. Benning, GA are gratefully acknowledged.

    Publication Notes

    • You may send email to to request a hard copy of this publication.
    • (Please specify exactly which publication you are requesting and your mailing address.)
    • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
    • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.


    Rummer, B.; Outcalt, K.; Brockway, D. 2002. Mechanical mid-story reduction treatments for forest fuel management. In: New century: new opportunities: 55th annual southern weed science society meeting; 2002 January 28-30; Atlanta, GA. Champaign, IL: Southern Weed Science Society: 76 [Abstract].

    Related Search

    XML: View XML
Show More
Show Fewer
Jump to Top of Page