Fundamentals of composite processing : proceedings of a workshop : November 5-6, 2003, Madison, WI.Author(s): Jerrold E. Winandy; Frederick A. Kamke
Source: Gen. Tech. Rep. FPL-GTR-149. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 118 pages.
Publication Series: General Technical Report (GTR)
Station: Forest Products Laboratory
View PDF (7.8 MB)
DescriptionThe USDA Forest Service, Forest Products Laboratory (Madison, Wisconsin)and the Wood-Based Composites Center of Virginia Tech (Blacksburg, Virginia) co-sponsored a conference, held November 5–6, 2003, in Madison, Wisconsin, on the fundamentals of composite processing. The goals were to assess what we know, define what we need to know, and then establish the state of the art in hot-pressing of wood-based, particulate composites. Academic and industrial professionals from around North America and Europe were invited to participate because of their expertise and interest in this area of research. The workshop covered four critical topics associated with hot-pressing of composites: resin curing and bonding, press control, physics of hotpressing, and computer simulations of the pressing process. This report is the official record of the presentations and discussions that occurred during this workshop.
CitationWinandy, Jerrold E.; Kamke, Frederick A. 2004. Fundamentals of composite processing : proceedings of a workshop : November 5-6, 2003, Madison, WI. Gen. Tech. Rep. FPL-GTR-149. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 118 pages.
KeywordsComposites, processing, engineered wood
Investigation of bio-composites using Novolac type liquefied wood resin: effects of liquefaction and fabrication conditions
- Tensile and thickness swelling properties of strands from Southern hardwoods and Southern pine : effect of hot-pressing and resin application
- Dynamic control of moisture during hot pressing of wood composites
XML: View XML