Skip to Main Content
Preparation of wood for energy useAuthor(s): Donald L. Sirois; Bryce J. Stokes
Source: In: Proceedings of the 5th Annual Solar & Biomass Energy Workshop; 1985 April 23-25; Atlanta, GA. Tifton, GA: U.S. Department of Agriculture Research Service. p. 173-174.
Publication Series: Miscellaneous Publication
PDF: Download Publication (539 KB)
DescriptionThis paper presents an overview & current sources and forms of raw materials for wood energy use and the types of machines available to convert them to the desired form for boiler fuel. Both the fuel source or raw material, and the combustion furnace will dictate the requirements for the processing system. Because of the wide range of processing equipment available, systems can be designed to meet most wood burning boiler requirements.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationSirois, Donald L.; Stokes, Bryce J. 1985. Preparation of wood for energy use. In: Proceedings of the 5th Annual Solar & Biomass Energy Workshop; 1985 April 23-25; Atlanta, GA. Tifton, GA: U.S. Department of Agriculture Research Service. p. 173-174.
- Chapter 6: Wood energy and competing wood product markers
- Status of timber utilization on the Pacific Coast.
- Converting small industrial boilers to burn wood fuels
XML: View XML