Skip to Main Content
Alternate biomass harvesting systems using conventional equipmentAuthor(s): Bryce J. Stokes; William F. Watson; I. Winston Savelle
Source: In: Saucier, Joseph R., ed. Proceedings of the 1984 Southern Forest Biomass Workshop; 1984 June 5-7; Athens, GA. Asheville, NC: U.S. Department of Agriculture, Forest Service. p. 111-114
Publication Series: Miscellaneous Publication
PDF: View PDF (362 KB)
DescriptionThree harvesting methods were field tested in two stand types. Costs and stand utilization rates were developed for a conventional harvesting system, without energy wood recovery; a two-pass roundwood and energy wood system; and a one-pass system that harvests roundwood and energy wood. The systems harvested 20-acre test blocks in two pine pulpwood plantations and in a natural pine sawtimber stand. The one-pass method resulted in the least cost and better utilization of biomass residue.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationStokes, Bryce J.; Watson, William F.; Savelle, I. Winston. 1985. Alternate biomass harvesting systems using conventional equipment. In: Saucier, Joseph R., ed. Proceedings of the 1984 Southern Forest Biomass Workshop; 1984 June 5-7; Athens, GA. Asheville, NC: U.S. Department of Agriculture, Forest Service. p. 111-114
- Integration of Biomass Harvesting and Site Preparation
- Comparisons of two methods of harvesting biomass for energy
- High tonnage harvesting and skidding for loblolly pine energy plantations
XML: View XML