Skip to Main Content
The potential for error in samplingAuthor(s): Jack Lewis
Source: Water Environment Laboratory Solutions 7(2): 10-11.
Publication Series: Miscellaneous Publication
PDF: View PDF (56 KB)
DescriptionEditor's note: The measurement of water quality parameters in environmental laboratories follows standard quality control protocols using methodologies approved by the U.S. Environmental Protection Agency. However, little attention has been given to quality assurance and quality control in activities outside the laboratory. This article describes some of those issues for sampling suspended sediment loads in streams and rivers.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationLewis, Jack. 2000. The potential for error in sampling. Water Environment Laboratory Solutions 7(2): 10-11.
KeywordsPSW4351, Caspar Creek, water quality, sampling suspended sediment loads, streams
- Quantity is Nothing without Quality: Automated QA/QC for Streaming Environmental Sensor Data
- Can laboratory and pilot recycling trials predict adhesive removal in commercial recycling systems? : results from the USPS environmentally benign stamp project
- A Systematic Approach to the Study of Accelerated weathering of Building Joint Sealants
XML: View XML