Skip to Main Content
Laboratory-Scale Development of a Structural Exterior Flakeboard from Hardwoods Growing on Southern Pine SitesAuthor(s): C. -Y. Hse; P. Koch; C.W. McMillin; E.W. Price
Source: Forest Products Journal 25(4):42-50
Publication Series: Miscellaneous Publication
PDF: Download Publication (2.1 MB)
DescriptionA series of experiments was conducted to develop a 1/2-inch-thick, structural, exterior, mixed-species flakeboard functionally competitive with sheathing grades of plywood. The board design settled on is comprised of equal-weight portions throughout of Carya spp., Quercus alba L., Quercus falcata Michx.,
L., and southern pine (e.g., Pinus taeda L.). These species were cut with a shaping-lathe headrig to yield face flakes 0.015 inch thick and core flakes 0.025 inch thick. All flakes were 3 inches long; those used in the core were reduced in width by milling. Phenol-formaldehyde binder (5.5%) as blended with flakes initially at 4 percent moisture content. Just prior to pressing, the mat was water-sprayed on both aides. Press time was 5 minutes at 335°F. All the panels had random flake orientation in the core; half the panels had random faces; the other half had faces comprised of aligned flakes.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHse, C. -Y.; Koch, P.; McMillin, C.W.; Price, E.W. 1975. Laboratory-Scale Development of a Structural Exterior Flakeboard from Hardwoods Growing on Southern Pine Sites. Forest Products Journal 25(4):42-50
- Laboratory-scale development of structural exterior flakeboard from hardwoods growing on southern pine sites
- Flakeboard properties as affected by flake cutting techniques
- Exterior structural composite panels with southern pine veneer faces and cores of southern hardwood flakes
XML: View XML