Skip to Main Content
Whole-tree utilization of southern pine advanced by developments in mechanical conversionAuthor(s): P. Koch
Source: Forest Products Journal 23(10):30-33
Publication Series: Miscellaneous Publication
PDF: Download Publication (708 KB)
DescriptionIn 1963 approximately 30 percent of the dry weight of above- and below-ground parts of southern pine trees ended as dry-surfaced lumber or paper; the remaining 70 percent was largely unused. By 1980, computer-controlled chipping headrigs, thin-kerf saws, lamination of lumber from rotary-cut veneer, high-yield pulping processes, and more intensive use of roots, bark, and tops will likely double the yield of lumber, paper, bark products, and reconstituted board to 60 percent of the dry weight of above and below-ground tree parts.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKoch, P. 1973. Whole-tree utilization of southern pine advanced by developments in mechanical conversion. Forest Products Journal 23(10):30-33
- Full-tree utilization of southern pine and hardwoods growing on southern pine sites
- Whole-tree utilization of southern pine advanced by developments in mechanical conversion
- Aboveground Biomass of Choctawhatchee Sand Pine in Northwest Florida
XML: View XML