Skip to Main Content
Some mechanical properties of small specimens cut from 1.79-inch-thick southern pine dried for 6 hours at 300°F or for 5 days at 180°F- A ComparisonAuthor(s): P. Koch; W.L. Wellford
Source: Wood and Fiber 8(4):235-240
Publication Series: Scientific Journal (JRNL)
PDF: Download Publication (817 KB)
DescriptionSmall specimens cut from 1.79-inch-thick southern pine dried from green condition for 6 hours at a dry-bulb temperature of 300 F suffered no diminution in the mechanical properties determined, when compared to matched wood dried for 5 days at 180 F.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKoch, P.; Wellford, W.L., Jr. 1978. Some mechanical properties of small specimens cut from 1.79-inch-thick southern pine dried for 6 hours at 300°F or for 5 days at 180°F- A Comparison. Wood and Fiber 8(4):235-240
- Effect of drying temperature on warp and downgrade of 2 by 4's from small-diameter ponderosa pine
- Drying southern pine at 240°F-- effects of air velocity and humidity, board thickness and density
- Kiln time and temperature affect shrinkage, warp, and mechanical properties of southern pine lumber
XML: View XML