Skip to Main Content
Influence of extractives on bonding properties of white and southern red oakAuthor(s): Mon-Lin Kuo; Daniel DiCarlo; Chung-Yun Hse
Source: Journal of Adhesion 16:257-278
Publication Series: Miscellaneous Publication
PDF: View PDF (2.1 MB)
DescriptionWhite and southern red oak veneer were subjected to four methods of drying followed by five surface treatments. The four drying methods were mill drying at 350°F, laboratory drying at 350 and 212°F, and air drying. The five surface treatments were no treatment, surface scraping, soaking and dipping in 1% NaOH aqueous solution, and water extraction. Plywood panels were prepared by using a phenol-formaldehyde resin.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKuo, Mon-Lin.; DiCarlo, Daniel; Hse, Chung-Yun. 1984. Influence of extractives on bonding properties of white and southern red oak. Journal of Adhesion 16:257-278
- Viability of litter-stored Quercus falcata Michx. acorns after simulated prescribed winter burns
- Propagation of Southern Red Oak and Water Oak by Rooted Cuttings
- The phenolic extractives in southern red oak (Quercus falcata Michx. var. falcata)
XML: View XML