Skip to Main Content
Fibril angle of loblolly pine wood as related to specific gravity, growth rate, and distance from pithAuthor(s): C.W. McMillin
Source: Wood Science and Technology 7(251-255
Publication Series: Miscellaneous Publication
PDF: View PDF (592 KB)
DescriptionFibril angles were greater for earlywood (avg. 33.4°) than for latewood tracheida (avg. 26.9°). For earlywood, fibril angle did not differ between growth rates when the specific gravity was low (avg. 33.3°). When the specific gravity was high, wood of fast growth had a higher fibril angle (avg. 35.1.°) than wood of slow growth (avg. 32.0°). No differences were detected between core, middle, and outer wood. In latewood tracheida, fibril angles were greater in corewood (avg. 28.0°) than in middle or outer wood (avg. 26.3°). For whole wood (a weighted average of earlywood and latewood), fibril angle averaged 30.7° and was greater in corewood (avg. 32.2°) than in middle or outer wood (avg. 29.9°).
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMcMillin, C.W. 1973. Fibril angle of loblolly pine wood as related to specific gravity, growth rate, and distance from pith. Wood Science and Technology 7(251-255
- Fibril angle of loblolly pine wood as related to specific gravity, growth rate, and distance from pith
- Wood and Bark Properties of Spruce Pine
- Water availability and genetic effects on wood properties of loblolly pine (Pinus taeda)
XML: View XML