Skip to Main Content
Gluebond strength of laser cut woodAuthor(s): Charles W. McMillin; Henry A. Huber
Source: Forest Products Journal 35(1):23-25
Publication Series: Scientific Journal (JRNL)
PDF: Download Publication (1.8 MB)
DescriptionThe degree of strength loss when gluing laser cut wood as compared to conventionally sawn wood and the amount of additional surface treatment needed to improve bond quality were assessed under normal furniture plant operating conditions. The strength of laser cut oak glued with polyvinyl acetate adhesive was reduced to 75 percent of sawn joints and gum was reduced 43 percent. It was concluded that for this adhesive a treatment between light sanding and jointing would be needed to glue laser cut wood, depending on species and laser characteristics.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMcMillin, Charles W.; Huber, Henry A. 1985. Gluebond strength of laser cut wood. Forest Products Journal 35(1):23-25
- Hardwood press-lam crossties : processing and performance
- Comparison of glue-line quality between gang edging and straight-line ripping
- Gluing of Eastern Hardwoods: A Review
XML: View XML