Skip to Main Content
New curing system for urea-formaldehyde resins with polyhydrazides. I. Curing with poly(methycrylol hydrazide)Author(s): Katsumasa Miyake; Bunichiro Tomita; Chung-Yun Hse; George E. Myers
Source: Mokuzai Gakkaishi 35(8):736-741
Publication Series: Miscellaneous Publication
PDF: Download Publication (912 KB)
DescriptionA new curing system for urea-formaldehyde (UF) resins was investigated using poly(methacryloyl hydrazide) as the curing reagent. Results were as follows: 1) Gel time and the water-soluble part of cured resins were determined as function of pH and molar ratio [hydrazide group/(free formaldehyde+methylol group)]. It was found that the reaction in this system proceeds for a short time under neutral conditions, and that the reaction of hydrazide groups with UF resin involves two stages with the second stage occuring at a rather high temperature. 2) The adhesive shear strength of lap-joint specimens prepared under the new system was comparable to that by conventional curing with ammonium chloride, although it decreased after watersoaking at 60°C. 3) The adhesive strength of plywood specimens decreased as the molar ratio increased.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMiyake, Katsumasa; Tomita, Bunichiro; Hse, Chung-Yun; Myers, George E. 1989. New curing system for urea-formaldehyde resins with polyhydrazides. I. Curing with poly(methycrylol hydrazide). Mokuzai Gakkaishi 35(8):736-741
- New curing system of urea-formaldehyde resind with polyhydrazides. I. Curing with dihydrazie compounds
- Analysis of curing process and thermal properties of phenol-urea-formaldehyde cocondensed resins
- Heat stability of cured urea-formaldehyde resins by measuring formaldehyde emission
XML: View XML