Skip to Main Content
Bottomland hardwoods for structual flakeboardsAuthor(s): Eddie W. Price; Chung-Yun Hse
Source: Forest Products Journal 33(11/12):33-40
Publication Series: Miscellaneous Publication
PDF: View PDF (3.3 MB)
DescriptionSeven species found growing in bottomland hardwood sites were evaluated for their potential in being utilized in a structural flakeboard. The evaluation process consisted of three phases of investigation. Phase I investigated properties of flakeboards fabricated with several flake lengths and thicknesses using all seven species. In Phase II, properties of panels made with single species and mixtures such as all high-density species, all low-density species, and combinations of high- and low-density species were obtained. For Phase III, an alternative flaker disk was used to generate flakes for panel fabrication. Phase III panels were fabricated with flakes generated from both heated and ambient temperature conditioned bolts. Also, powder and liquid phenolic resins were used in the Phase III investigation. The data indicated a panel with acceptable properties is technically feasible using several fabrication arrangements.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationPrice, Eddie W.; Hse, Chung-Yun 1983. Bottomland hardwoods for structual flakeboards. Forest Products Journal 33(11/12):33-40
- Flakeboard properties as affected by flake cutting techniques
- Preliminary study on flakeboard panels made from aspen slash wood
- Construction variables considered in fabrication of a structural flakeboard
XML: View XML