Skip to Main Content
Recording wildlife locations with the Universal Transverse Mercator (UTM) grid systemAuthor(s): T. G. Grubb; W. L. Eakle
Source: Res. Note RM-483. Fort Collins, CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Forest and Range Experiment Station. 3 p.
Publication Series: Research Note (RN)
Station: Rocky Mountain Forest and Range Experiment Station
View PDF (585.55 KB)
DescriptionThe Universal Transverse Mercator (UTM) international, planar, grid system is described and shown to offer greater simplicity, efficiency and accuracy for plotting wildlife locations than the more familiar Latitude-Longitude (Latilong) and Section-Township-Range (Cadastral) systems, and the State planar system. Use of the UTM system is explained with examples.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationGrubb, T. G.; Eakle, W. L. 1988. Recording wildlife locations with the Universal Transverse Mercator (UTM) grid system. Res. Note RM-483. Fort Collins, CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Forest and Range Experiment Station. 3 p.
KeywordsUniversal Transverse Mercator system, grid system, plotting, mapping, wildlife locations
- Effects of various fire-retardants on plate shear and five-point flexural shear properties of plywood
- Estimating slash fuel loading for several Lake States tree species.
- A comparison of five sampling techniques to estimate surface fuel loading in montane forests
XML: View XML