Skip to Main Content
U.S. Forest Service
Caring for the land and serving people

United States Department of Agriculture

Home > Search > Publication Information

  1. Share via EmailShare on FacebookShare on LinkedInShare on Twitter
    Dislike this pubLike this pub
    Author(s): John W. Clarke; Marshall S. White; Philip A. Araman
    Date: 2005
    Source: Pallet Enterprise. 25(2): 68-73
    Publication Series: Miscellaneous Publication
    PDF: View PDF  (118.57 KB)


    Over 135 million wooden pallets were repaired for reuse in 1995. Notched stringers are one of the most commonly damaged components. Metal plates, half companion stringers, and full companion stringers are repair methods described in the U.S. industry standard published by the American Society of Mechanical Engineers. This study evaluated the effect of these three stringer repair methods on the bending strength and stiffness of 48x40 GMA-style pallets spanning the pallet stringers. Pallets with up to two stringers repaired with full-companion stringers were stronger and stiffer than new, undamaged pallets. In general, pallets with one or two repaired stringers using up to two metal plates or half-companion stringer repairs were as strong or stronger, but less stiff, than the original pallets without stringer repairs.

    On the other hand, on average pallets with two stringers repaired with metal plates or half-companions were less strong and less stiff than pallets with only one such repair. These results indicate that all three repair practices (metal plates, half-companions, and full companions), when properly applied, will restore pallet strength when used to repair one notch on one or two stringers of a 48x40 partial 4-way, three stringer pallet.

    There may be an additional species effect on repair performance that warrants further evaluation. Current repaired pallet grades group metal plate repairs in upper grades, while companion member repairs are placed in lower grades. Based on functionality with material handling equipment, these grades do not reflect the racking performance of these repair methods.

    Publication Notes

    • You may send email to to request a hard copy of this publication.
    • (Please specify exactly which publication you are requesting and your mailing address.)
    • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
    • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.


    Clarke, John W.; White, Marshall S.; Araman, Philip A. 2005. Effect of stringer repair methods and repair frequency on GMA performance. Pallet Enterprise. 25(2): 68-73

    Related Search

    XML: View XML
Show More
Show Fewer
Jump to Top of Page