Skip to Main Content
Multiple-bolted joints in wood members : a literature reviewAuthor(s): Peter James Moss
Source: Gen. Tech. Rep. FPL–GTR–97. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 18 p.
Publication Series: General Technical Report (GTR)
Station: Forest Products Laboratory
Download Publication (392 KB)
DescriptionThis study reviewed the literature on experimental and analytical research for the connection of wood members using multiple laterally loaded bolts. From this, the influence of geometric factors were ascertained, such as staggered and aligned fasteners, optimum fastener configurations, row factors and length-to-diameter bolt ratios, spacing, end and edge distances, and the effect of mixed types and sizes of fasteners and eccentric loading. Areas of additional research needed on multiple-bolted joints in wood members are identified.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMoss, Peter James. 1997. Multiple-bolted joints in wood members : a literature review. Gen. Tech. Rep. FPL–GTR–97. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 18 p.
KeywordsMultiple-bolted joints, literature reviews, multiple laterally loaded bolts, joints, bolts
- Bolted-connection design
- Development of failure mechanisms for fasteners in the United States
XML: View XML