Aerial Ignition Home > Fuel Gelling > Equipment > MTDC Batch Mixer > Operation Manual > DOT Requirements

Equipment

MTDC Batch Mixer

Batch Mixer Owner’s Manual (continued)

Back | Next
Table of Contents

DOT Requirements

License requirements

• Commercial Drivers License (CDL) with hazmat endorsement

Driver Training

• General awareness, function specific, safety, and security

Placarding requirements

Placarding with UN1993 identification number required on 4 sides of tank, vehicle, or trailer

Inspection requirements

The following inspections are required. These must be performed by a qualified tank inspection facility. The month and year of each test must be indicated on the side of the tank.

• Yearly
  • External Visual Inspection (indicated by letter V)
  • Leakage Test (indicated by letter K)
    
    
• Every 5 years
  • Internal Visual Inspection (indicated by letter I)
  • Pressure Test (indicated by letter P)

Tank Inspection Information
This Tank Was Last Inspected December 2001